Thermacore® Sectional Steel Doors – 594
Model 594
The Thermacore® Sectional Door Model 594 offers excellent thermal efficiency for medium-duty applications. The Model 594 doors feature a raised-panel, wood-grain textured surface for a more decorative appearance. This product is an exceptionally popular choice for RV door applications.
Overview
Construction
| Product Specifications | |
|---|---|
| Standard Max Width | 20’2″ (6147 mm) |
| Standard Max Height | 16’1″ (4902 mm) |
| Panel thickness | 1 3/8″ (35 mm) |
| U-factor* | .15 |
| R-value** | 12.76 (K m2/W) |
| Air infiltration | at 25 mph (40 kmp/h) .15 cfm/ft2 (2.74 m3/hr/m2) |
| Thermal break | Hot melt |
| Exterior Steel | .012″ (.3 mm) galv. |
| Exterior Surface | Ribbed, textured |
| Standard Springs | 10,000 cycles |
*U-factor values are independently tested and verified per ANSI/DASMA 105.
**Overhead Door uses a calculated door section R-value for our insulated doors.
Warranty
- 10 year limited delamination
- 1 year limited on door
- 3 year/20,000 cycle limited on door & operator system (when purchased together; on material and workmanship)
- 20 year limited on high performance fluoropolymer coating option
Options
Raised Panel
White
Desert Tan
Almond
Sandstone
Forest Green
Brown
Terra Bronze
Trinar White
Trinar Beige
Trinar Brown
High performance fluoropolymer coating (Trinar® or equivalent) finish option available in white, brown and beige. Offers superior performance.
Actual door color may vary from the digital representation shown here. Color samples are available by request through your Overhead Door™ Distributor.
- Chain Hoist or Electric Operator is recommended for doors above 10’ tall or more than 400 pounds
- Insulated glass, tempered glass, polycarbonate, multi-wall polycarbonate, etc.
- Aluminum sash section available up to 20’2″ (6147 mm) wide
- High performance fluoropolymer coating (Trinar® or equivalent)
- High-usage package
- Wind load options
- Electric operator
- Chain hoist
- Posi-Tension™ drums
- Safety bottom fixture
- Bottom-sensing edge
- Flexible jamb, header seal
- Exhaust ports
- Window Glazing Options
Brochures
Documents
Thermacore® Sectional Steel Doors
Related products
Aluminum Glass Door – 511
Model 511
Aluminum Glass Door model 511 is designed in sizes up to 16'2" (4928 mm) wide and 16'1" high (4902 mm). Featuring a narrow center stile width of 21/32" (17 mm), these doors are sleek, attractive and permit maximum visibility. An array of glazing choices, top and bottom rail widths, finishes and special options customizes the 511 to satisfy nearly any project requirement.
Sectional Steel Door Model 420
Model 420
Sectional steel door model 420 is designed for heavy-duty use in a variety of commercial and industrial applications. The Model 420 door features a 2" (51 mm) panel thickness, 16-gauge steel intermediate and end stiles, ribbed steel exterior and a white paint finish. This 20-gauge steel door is available in sizes up to 31´2" (9500 mm) in width and 24´1" (7341 mm) in height. Numerous options including weatherstripping, reinforced struts, movable center posts, and motor operation allow these heavy-duty doors to meet nearly any project requirements.
Sectional Steel Door Model 422
Model 422
Sectional Steel Door model 422 door is ideal for heavy-duty applications requiring protection against the elements. These doors feature a 2" (51 mm) panel thickness, 16-gauge steel intermediate and end stiles, ribbed steel exterior and 26-gauge steel back cover in a white finish. Polystyrene insulation provides an R-value of 7.35. The Model 422 is a 20-gauge steel door available in sizes up to 29´2" in width and 24´1" in height (8890 mm and 7341 mm). A multitude of options -- including reinforcing struts, movable center posts, and motor operation allow these insulated heavy-duty doors to be used in a variety of commercial and industrial environments.
Sectional Steel Door Model 424
Model 424
Section Steel Door model 424 are designed for heavy-duty use in a variety of commercial and industrial applications. This door features a 2" (51 mm) panel thickness, 16-gauge steel intermediate and end stiles, ribbed steel exterior and a white paint finish. The Model 424 is available in sizes up to 30´2" (9195 mm) in width and 24´1" (7341 mm) in height, and is also available in Industrial Brown. Numerous options including weather stripping, reinforced struts, movable center posts and motor operation allow these heavy-duty doors to meet nearly any project requirements.
Sectional Warehouse Doors
Model 404
Our Sectional Warehouse Doors provide a highly efficient design for strength and longevity for use in demanding commercial settings. They feature full 2” thickness for ultimate strength and durability. Optional insulation consists of 1 5/16” expanded polystyrene throughout the door. Both steel and polylaminate backer choices are available to ensure these models are well-suited for a wide range of applications.
Sectional Warehouse Doors
Model 405
Our Sectional Warehouse Doors provide a highly efficient design for strength and longevity for use in demanding commercial settings. They feature full 2” thickness for ultimate strength and durability. Optional insulation consists of 1 5/16” expanded polystyrene throughout the door. Both steel and polylaminate backer choices are available to ensure these models are well-suited for a wide range of applications.
