Thermacore® Sectional Steel Door – 598
Model 598
The Thermacore® Sectional Door Model 598 is a an exceptionally well-built door that provides a higher level of thermal protection than standard insulated doors. This premium insulated sectional door represents an economical choice for lighter-duty applications.
Overview
Construction
| Product Specifications | |
|---|---|
| Standard Max Width | 16’2″ (4,928 mm) |
| Standard Max Height | 14’1″ (4,293 mm) |
| Panel thickness | 1″ (25.4 mm) |
| U-factor* | .20 |
| R-value** | 9.31 (1.64 W/m2) |
| Air infiltration | at 25 mph (40 kmp/h) .46 cfm/ft2 (8.40 m3/hr/m2) |
| Thermal break | Hot melt |
| Exterior Steel | .012″ (.3 mm) galv. |
| Exterior Surface | Ribbed, textured |
| Standard Springs | 10,000 cycles |
*U-factor values are independently tested and verified per ANSI/DASMA 105.
**Overhead Door uses a calculated door section R-value for our insulated doors.
Warranty
- 8 year limited delamination
- 1 year limited on door
- 3 year/20,000 cycle limited on door & operator system (when purchased together; on material and workmanship)
Options
Ribbed Panel
Actual door color may vary from the digital representation shown here. Color samples are available by request through your Overhead Door™ Distributor.
Exterior Colors
White
- Chain Hoist or Electric Operator is recommended for doors above 10’ tall or more than 400 pounds
- Thermal glazing
- High-usage components
- Wind load options
- Electric operator
- Chain hoist
- Posi-Tension™ drums
- Safety bottom fixture
- Flexible jamb, header seal
- Photo eyes
- Window Glazing Options
Documents
Thermacore® Sectional Steel Door
Related products
Aluminum Glass Door – 521s
Model 521s
EverServe® Aluminum Glass Door model 521S is a sectional aluminum door appropriate for environments where maximum light infiltration and/or visual access is required. Designed to fit openings up to 20'2" (6147 mm) wide and 18'1" (5512 mm) high, the Model 521 features a wide, 2-11/16" (68 mm) center stile, 3-3/4" (95 mm) or 4-1/2" (114 mm) bottom rail, based on door size.
Sectional Steel Door Model 418
Model 418
When your project requires a solid sectional steel door system that will hold up to heavy use, rough handling and extreme conditions look to Overhead Door™ 418 to pack an extra measure of toughness. Fabricated of 16-gauge, flush galvanized steel exterior and 26-gauge steel back cover, these 2" (51 mm) thick doors offer an R-value of 7.35 (1.29 W/m2). A wide array of options allow these doors to meet the most stringent project requirements that call for a degree of thermal efficiency.
Sectional Steel Door Model 420
Model 420
Sectional steel door model 420 is designed for heavy-duty use in a variety of commercial and industrial applications. The Model 420 door features a 2" (51 mm) panel thickness, 16-gauge steel intermediate and end stiles, ribbed steel exterior and a white paint finish. This 20-gauge steel door is available in sizes up to 31´2" (9500 mm) in width and 24´1" (7341 mm) in height. Numerous options including weatherstripping, reinforced struts, movable center posts, and motor operation allow these heavy-duty doors to meet nearly any project requirements.
Sectional Steel Door Model 424
Model 424
Section Steel Door model 424 are designed for heavy-duty use in a variety of commercial and industrial applications. This door features a 2" (51 mm) panel thickness, 16-gauge steel intermediate and end stiles, ribbed steel exterior and a white paint finish. The Model 424 is available in sizes up to 30´2" (9195 mm) in width and 24´1" (7341 mm) in height, and is also available in Industrial Brown. Numerous options including weather stripping, reinforced struts, movable center posts and motor operation allow these heavy-duty doors to meet nearly any project requirements.
Sectional Warehouse Door
Model 402
Our Sectional Warehouse Doors provide a highly efficient design for strength and longevity for use in demanding commercial settings. They feature full 2” thickness for ultimate strength and durability. Optional insulation consists of 1 5/16” expanded polystyrene throughout the door. Both steel and polylaminate backer choices are available to ensure these models are well-suited for a wide range of applications.
Sectional Warehouse Doors
Model 406
Our Sectional Warehouse Doors provide a highly efficient design for strength and longevity for use in demanding commercial settings. They feature full 2” thickness for ultimate strength and durability. Optional insulation consists of 1 5/16” expanded polystyrene throughout the door. Both steel and polylaminate backer choices are available to ensure these models are well-suited for a wide range of applications.
Thermacore® Sectional Steel Door – 591
Model 591
When your project requires a sectional door with an exceptional degree of thermal efficiency, the Thermacore® Sectional Steel Door Model 591 is a proven performer. The Thermacore® steel-polyurethane-steel panel construction provides a thermal barrier that withstands extreme climatic conditions and the most demanding environmental requirements.
This 1 5/8” (41 mm) thick, heavy duty door fits a wide range of opening sizes and the spectrum of applications — making it the best-selling door system in the Thermacore® line and one of the most-specified insulated sectional doors in the industry. Boasting a U-factor of .13 (R-value-14.86) and one of the best air infiltration ratings, the Thermacore® 591 will meet or exceed almost any thermally efficient application requirement.
Thermacore® Sectional Steel Door – 599
Model 599
With a U-factor of .10 (R-value of 17.5), and one of the best overall air infiltration ratings in the industry, the Thermacore® Sectional Steel Door Model 599 is one of the most thermally efficient door systems in its class. The Model 599 doors also carry a Class 26 sound transmission rating for applications where sound suppression is desirable.
The Thermacore® line features steel-polyurethane-steel panel construction which provides a thermal barrier that withstands extremely hot or cold climates and the most demanding environmental requirements.
