Thermacore® Sectional Steel Door – 592
Model 592
The Thermacore® Model 592 offers superior thermal efficiency for heavy-duty applications. It is an ideal choice for applications that demand the highest levels of thermal efficiency, air infiltration, and wind load resistance.
With a U-factor of .10 (R-value of 17.5) and one of the best overall air infiltration ratings in the industry, the Thermacore® Model 592 is one of the most thermally efficient door system in its class.
The Thermacore® product line features steel-polyurethane-steel panel construction which provides a thermal barrier that withstands extremely hot or cold climates and the most demanding environmental requirements.
The Model 592 has 2″ (51 mm) thick, extra heavy-duty sections that are available in standard sizes up to 40’2″ and 32’1″ (12,243 mm and 9,779 mm) to fit the broadest range of applications.
Overview
Construction
| Product Specifications | |
|---|---|
| Standard Max Width | 40’2″ (12,243 mm) |
| Standard Max Height | 32’1″ (9,779 mm) |
| Panel thickness | 2″ (51 mm) |
| U-factor* | .10 |
| R-value** | 17.5 (3.09 W/m2) |
| Sound Transmission Class 20 | Ideal for applications that require sound control |
| Air infiltration | at 25 mph (40 kmp/h) .13 cfm/ft2 (2.37 m3/hr/m2) |
| Thermal break | PVC |
| Exterior Steel | .015″ (.38 mm) galv. |
| Exterior Surface | Ribbed, textured |
| Standard Springs | 10,000 cycles |
| Wind Load | Designs available for usage in high-wind conditions |
*U-factor values are independently tested and verified per ANSI/DASMA 105.
**Overhead Door uses a calculated door section R-value for our insulated doors.
Warranty
- 10 year limited delamination
- 1 year limited on door
- 3 year/20,000 cycle limited on door & operator system (when purchased together; on material and workmanship)
- 20 year limited on high performance fluoropolymer coating option
Options
Ribbed Panel
White
Gray
Tan
Industrial Brown
Black
Trinar White
Trinar Brown
Trinar Beige
High performance fluoropolymer coating (Trinar® or equivalent) finish option available in white, brown and beige. Offers superior performance.
Actual door color may vary from the digital representation shown here. Color samples are available by request through your Overhead Door™ Distributor.
- Chain Hoist or Electric Operator is recommended for doors above 10’ tall or more than 400 pounds
- Aluminum sash section available up to 24’2″ (7,366 mm) wide
- Insulated glass, tempered glass, polycarbonate, multi-wall polycarbonate, etc.
- High performance fluoropolymer coating (Trinar® or equivalent)
- Four-section pass door
- High-usage package
- Wind load options
- Electric operator
- Chain hoist
- Posi-Tension™ drums
- Safety bottom fixture
- Bottom-sensing edge
- Flexible jamb, header seal
- Exhaust ports
- Window Glazing Options
- Impact Section Available
Brochures
Documents
Thermacore® Sectional Steel Door
Related products
Sectional Steel Door Model 416
Model 416
Sectional steel door model 416 is strong, durable and versatile. Designed for heavy-duty commercial and industrial applications, this door is available in 16-gauge galvanized steel, in sizes up to 32'2" (9804 mm) width and 21'1" (6426 mm) in height. Available with an array of options, the Model 416 can be easily customized to meet any project requirement where an extra heavy-duty door is required.
Sectional Steel Door Model 420
Model 420
Sectional steel door model 420 is designed for heavy-duty use in a variety of commercial and industrial applications. The Model 420 door features a 2" (51 mm) panel thickness, 16-gauge steel intermediate and end stiles, ribbed steel exterior and a white paint finish. This 20-gauge steel door is available in sizes up to 31´2" (9500 mm) in width and 24´1" (7341 mm) in height. Numerous options including weatherstripping, reinforced struts, movable center posts, and motor operation allow these heavy-duty doors to meet nearly any project requirements.
Sectional Steel Door Model 422
Model 422
Sectional Steel Door model 422 door is ideal for heavy-duty applications requiring protection against the elements. These doors feature a 2" (51 mm) panel thickness, 16-gauge steel intermediate and end stiles, ribbed steel exterior and 26-gauge steel back cover in a white finish. Polystyrene insulation provides an R-value of 7.35. The Model 422 is a 20-gauge steel door available in sizes up to 29´2" in width and 24´1" in height (8890 mm and 7341 mm). A multitude of options -- including reinforcing struts, movable center posts, and motor operation allow these insulated heavy-duty doors to be used in a variety of commercial and industrial environments.
Sectional Steel Door Model 432
Model 432
Sectional steel door model 432 offer a 2" (51 mm) panel thickness, a nominal 24-gauge ribbed galvanized steel exterior, and a poly-bonded back cover. Polystyrene insulation provides an R-value of 7.35. A variety of options makes this door an economical solution for applications requiring a medium-duty insulated steel door.
Sectional Warehouse Doors
Model 403
Our Sectional Warehouse Doors provide a highly efficient design for strength and longevity for use in demanding commercial settings. They feature full 2” thickness for ultimate strength and durability. Optional insulation consists of 1 5/16” expanded polystyrene throughout the door. Both steel and polylaminate backer choices are available to ensure these models are well-suited for a wide range of applications.
Sectional Warehouse Doors
Model 404
Our Sectional Warehouse Doors provide a highly efficient design for strength and longevity for use in demanding commercial settings. They feature full 2” thickness for ultimate strength and durability. Optional insulation consists of 1 5/16” expanded polystyrene throughout the door. Both steel and polylaminate backer choices are available to ensure these models are well-suited for a wide range of applications.
Thermacore® Advanced Performance Door – 850
Model 850
Thermacore® AP Door Model 850 is engineered to deliver advanced performance in commercial and industrial applications where climate control, durability and ease of maintenance are primary concerns. This sectional steel door system presents the most advanced thermal performance values published by any major US manufacturer of 3" commercial insulated sectional doors.
The Thermacore® AP door system’s advanced performance answers the demand for more thermal efficiency, reliability, durability and design flexibility. The 850 door is the ideal choice for thermal protection against heat or cold in heavy duty applications, including: agricultural buildings, food and beverage storage facilities, pharmaceutical facilities, climate controlled facilities, industrial manufacturing facilities, government facilities, and shipping and receiving docks.
Thermacore® Sectional Steel Door – 596
Model 596
The Thermacore® Sectional Door Model 596 is ideal for extra heavy-duty applications where both thermal efficiency and sound suppression are desirable. The 596 is constructed of 20-gauge galvanized steel with a flush, textured finish. The sectional steel door model 596 incorporates the Thermacore® steel-polyurethane-steel panel construction, which provides a thermal barrier to withstand harsh climates and demanding environmental requirements.
