Rolling Steel Service Door – EverServe® 620S
Model 620S
EverServe® Model 620S
This heavy duty Stormtite™ springless service door is best suited for exterior applications that are exposed to harsh weather. The Model 620S provides security, reliability, ease of serviceability and advanced weather protection. The perimeter seals included in this design help protect against extreme weather conditions.
Overview
Construction
| Product Specifications | |
|---|---|
| Standard Max Width | up to 30′ (9246 mm) depending on gauge and slat type |
| Standard Max Height | up to 20′ (6096 mm) depending on gauge and slat type |
| Mounting | Interior or exterior face of wall |
| Control panel | Electronic controller with microprocessor self-diagnostics. Digital readout indicates door action, alarm conditions, and fault conditions. Time delay self-close timer and non-resettable cycle counter are included. One open/close/stop push button station integrated into the control panel. The enclosure is IP54 rated (NEMA 3 equivalent). |
| Curtain | Galvanized steel interlocking roll-formed slats, end locks attached to prevent lateral movement. Flat Profile type F-265 for doors up to 18’4″ wide – 22 gauge; From 18’5″ to 25’4″ – 20 gauge; From 25’5″ to 30’0″ – 18 gauge |
| Curtain finish | Gray, Tan, White or Brown polyester topcoat |
| Bottom bar | Two PowderGuard® Premium powder-coated black angles (min. thickness 3/16”) with weatherstrip |
| Hood | 24-gauge galvanized steel primed; motor and end cover provided |
| Brackets | Min. ¼” hot rolled primed, PowderGuard® Premium powder-coated black steel |
| Guides | Three structural steel angles PowderGuard® Premium powder-coated black; With high cycle UHMW wear strip |
| Stormtite™ perimeter seal system | Exterior guide seal, interior hood baffle, bottom astragal |
| Door roll | Direct driven, springless roll with integrated shafts; self-aligning grease-able sealed bearings; the door does not require counterbalance device |
| Safety devices | The built-in brake mechanism provides additional peace-of-mind against uncontrolled curtain travel. Photoelectric safety sensors with guards – provide obstruction monitoring during door operation to help prevent injury and damage |
| Operation | Direct drive integrated gear/motor/brake assembly; Drive assembly and limit sensors are factory pre-assembled; Manual hand chain for a power outage. Horsepower appropriate to door size/weight; 230V AC 3-phase motor |
| Actuator | Single open/close/stop push button station incorporated into the control panel |
| Wind load | 20 psf |
Warranty
- 36 month limited warranty coverage on the door system
Options
Standard Exterior Color
Brown
White
Gray
Tan
Actual door color may vary from the digital representation shown here. Actual color samples are available by request through your Overhead Door™ Distributor.
Powder Coat Color Options
PowderGuard® Premium powder coat options are available in approximately 200 colors as well as custom matching to specification.
Door Options
- Motor options: 208V AC 1PH†, 220V AC 1PH, 208V AC 3PH†, 230V AC 3PH, 460V AC 3PH†, 575V AC 3PH†
(†requires stand-alone mounted transformer) - Flat profile type F-265 for doors up to 30’ wide. Available in: 20, 18 gauge galvanized steel; 22, 20 gauge stainless steel; 16 gauge (.050”) aluminum*
- Bottom bar also available in: galvanized steel, stainless steel and aluminum
- Guide options include galvanized steel, powder coated steel
- Hood available in powder coat, stainless steel and aluminum; sloped hood also available
- Brackets also available in powder coat, galvanized steel
- IP65 (NEMA 4/4X equivalent) control panel
- Sensing edge for improved safety
- Additional set of photoelectric sensors
- Optional push buttons, loop detectors, radio control, motion detectors or any combination thereof available for door operation/control
- PowderGuard® Premium powder coat and PowderGuard® Max hardened powder coat available in approximately 200 colors as well as colormatching to specification
- PowderGuard® Textured Finish: Industrial textured powder coat provides a thicker, more scratch resistant coat for added product protection on guides, bottom bar and head plate
- Uniformly spaced glazed acrylic vision lites available in 3” x 5/8” or 10” x 1”
- High wind load options available
*Consult factory for specific slat profile and gauge width limits.
Documents
Springless Rolling Service Door EverServe®
Product Literature
Related products
Fire-Rated Rolling Counter Door – 660
Model 660
Fire-Rated Counter Doors with Stainless Steel Curtain, Frame and Hood
The Model 660 integral frame fire-rated counter doors provide a handsome finished appearance for a variety of applications, including food service counters, schools, concessions, hospitals, cafeterias and retail settings. These doors are available for openings up to 9'5” x 4'5” (2870 mm x 1346 mm) and carry a UL 1-1/2 hour label for masonry and non-masonry fire walls. The 660 Series integral frame doors are factory assembled as a complete unit with fully welded frames. The curtain, frame, guides, sill, hood and bottom bar are stainless steel. Additional safety and protection features are available, including: Fire Sentinel® time-delay release device, smoke detectors, horns, and strobes.
Fire-Rated Rolling Counter Door – 662
Model 662
Fire-Rated Counter Doors with Galvanized Steel Curtain, Stainless Steel Frame and Hood
Model 662 fire-rated counter doors an integral frame are suited for many applications including schools, retail settings, hospitals, food service counters, concessions and cafeterias. These doors fit openings up to 9’5” x 4’5” (2870 mm x 1346 mm) and carry a UL 1-1/2 hour label for masonry and non-masonry fire walls. Model 662 integral frame doors are assembled at the factory as a complete unit with fully welded frames. The curtain is 22-gauge galvanized steel with baked-on polyester top coat; while the frame, guides, sill, hood and fascia are stainless steel. Other safety and protection features are available, including: Fire Sentinel® time-delay release device, smoke detectors, horns, and strobes.
Integral Frame Rolling Counter Doors – 657
Model 657
The integral frame / packaged counter door Model 657 combines an attractive finished appearance with the convenience of a factory-assembled unit. These non-rated doors feature a high-quality 16-gauge stainless steel frame, hood and fascia complemented by a 14-gauge stainless steel sill. Available to fit openings up to 12'5" (3785 mm) wide and 6'5” (1956 mm) high, these rolling counter doors have a variety of applications including food service areas.
Rolling Counter Doors – 650
Model 650
Distinguished by their painted galvanized steel slat curtain finish, Model 650 rolling counter doors are designed to fit openings to 20' wide and 9' high. These doors are ideal for a host of small-opening applications where security is important and a non-rated door is appropriate. Common applications include concession areas, cafeterias, pharmacies, parts-storage areas and ticket windows.
Rolling Steel Service Door – 627
Model 627
Stormtite™ AP Model 627
Our Model 627 door system’s advanced performance answers the demand for more reliability, durability, security, flexibility and thermal efficiency. Ideal applications include: industrial manufacturing facilities, government facilities, public facilities, food and beverage distribution facilities, climate controlled facilities, healthcare facilities, shipping and receiving docks.
Rolling Steel Service Doors – 610
Model 610
Rolling steel door model 610 is a perennial best-seller for good reason. The standard features exceed the norm for quality and a myriad of options allow for true customization. The Model 610 is built with a standard galvanized steel curtain, or an optional stainless steel or aluminum curtain. The standard curtain slat is the attractive C-187 curved profile, with additional slat options available in curved and flat. Finishes range from four standard colors to approximately 200 powder coat colors or matched to your specification. A host of other options — including motor operation, pass doors, exhaust ports, between-jambs mounting, cylinder locks and special usage packages — allow the 610 to be adapted to any environment.
Security and Storm Shelter Model 610F is a specialized option designed for storm shelters, schools and emergency operations centers. Model 610F provides tornado resistance while meeting the high wind load and impact requirements for FEMA 361.
Upward Coiling Security Grilles – 670
Model 670
When your project calls for an upward coiling grille that is as versatile and attractive as it is rugged and secure, look no further than Model 670. These grilles provide an attractive yet functional means to secure areas where public access must be restricted, without blocking air, light or sight. A wide range of options make these grilles an ideal choice for interior or exterior use in a variety of retail, industrial and commercial settings.
