Rolling Integral Frame Counter Doors – 655
Model 655
The integral frame / packaged counter door Model 655 combines an attractive finished appearance with the convenience of a factory-assembled unit. These rolling counter doors feature a high-quality 16-gauge stainless steel frame, hood and fascia complemented by a 14-gauge sill. Available to fit openings up to 12’5″ (3785mm) wide and 6’5” 1956 mm) high, these rolling counter doors have a variety of applications including food service areas.
Overview
| Standard Max Width | 12’5″ (3785 mm) |
| Standard Max Height | 6’5″ (1956 mm) |
| Curtain | .04″ (1 mm) aluminum slats |
| Hood | Stainless steel |
| Integral frames | 16-gauge stainless steel |
| Sill | 14-gauge stainless steel |
| Mounting | Between jambs |
| Operation | Manual push up |
| Warranty | OEM limited |
Options
- Crank operation
- Cylinder locking options
- Tubular bottom bar
- Lintel brush seal
- Guide brush seal
Documents
Integral Frame Counter Doors
Related products
EverGuard™ Tornado Resistant Shelter Door – 610F
Model 610F
Designed to provide dependable protection from high wind and wind-borne debris during tornadoes and hurricanes. Built, tested, and certified to meet the stringent requirements of the ICC-500 building code as well as the FEMA 361 guideline.
The Model 610F is structural wind load design pressure tested to +/- 300 psf and is impact rated for up to 100 mph. Rolling Steel Storm Shelter Door Model 610F is built to meet your most demanding and rigorous applications.
Applications include schools, storm shelters, safe room, emergency operations centers, 911 call stations, fire, rescue, and ambulance stations, police stations.
Fire-Rated Rolling Counter Door – 662
Model 662
Fire-Rated Counter Doors with Galvanized Steel Curtain, Stainless Steel Frame and Hood
Model 662 fire-rated counter doors an integral frame are suited for many applications including schools, retail settings, hospitals, food service counters, concessions and cafeterias. These doors fit openings up to 9’5” x 4’5” (2870 mm x 1346 mm) and carry a UL 1-1/2 hour label for masonry and non-masonry fire walls. Model 662 integral frame doors are assembled at the factory as a complete unit with fully welded frames. The curtain is 22-gauge galvanized steel with baked-on polyester top coat; while the frame, guides, sill, hood and fascia are stainless steel. Other safety and protection features are available, including: Fire Sentinel® time-delay release device, smoke detectors, horns, and strobes.
Fire-Rated Rolling Service Door – 630
Model 630
FireKing® Model 630
These fire-rated rolling steel doors offer superior protection wherever a listed fire door is required. Common applications include factories, warehouses, mills, distribution centers and parking garages. Customized fire doors are available for conveyor openings. These doors feature fusible links mounted on both sides of the wall that separate to automatically close the door. UL recommends a 165º F (74º C) fuse link for ambient conditions for 100º F (38º C) or less, or a 212º F (100º C) fuse link for ambient conditions over 100º F (38º C). Additional safety and protection features are available, including: Fire Sentinel® time-delay release device, FireLite® vision lites, smoke detectors, horns and strobes. 
Fire-Rated Rolling Service Door – 631
Model 631
FireKing® Model 631
Fire-rated service door model 631 is a smaller fire door with UL/ULC ratings. The FireKing® Model 631 rolling fire-rated service door offers superior protection wherever a small UL listed fire door is required. Additional safety and protection features are available, including: Fire Sentinel® time-delay release device, FireLite® vision lites, smoke detectors, horns and strobes
Heavy Duty Springless Service Door – 610S
Model 610S
EverServe® Model 610S
This heavy duty springless service door is well suited for applications that require the security and performance of a rolling service door with the added benefits of increased cycle life, reliability, and ease of serviceability. The fenestration option allows for air circulation and visibility, making it an ideal solution for facility managers seeking to replace parking garage grilles.
Rolling Counter Doors – 652
Model 652
Distinguished by their clear anodized aluminum curtain finish, Model 652 rolling counter doors are designed to fit openings to 20' wide and 9' high. These doors are ideal for a host of small-opening applications where security is important and non-rated door is appropriate. Common applications include concession areas, cafeterias, pharmacies, parts-storage areas and ticket windows.
Rolling Sheet Door – 780CD
Model 780CD
ProStar™ Model 780CD
The Model 780CD rolling sheet door is designed to fit openings up to 16' by 16' (4877 mm by 4877 mm) with ease, versatility, and good looks. The Model 780CD is designed for heavy-usage environments where a high wind load-rated door is not required. Like the Model 790CW, this heavy-duty door is fabricated of high strength, 26-gauge galvanized steel curtain sections for superior performance. It also features our innovative quick-connect components that allow quick and easy assembly without sacrificing stability or durability. Stepped counterbalance rings and a unique curtain profile minimize nesting. The universal guide design further simplifies installation by allowing mounting directly to concrete, masonry, steel or wood jambs. Additional standard features such as dual rub strips on both edges of guide and a flexible webbing on both front edges of the curtain to minimize nesting ensure that the Model 780CD will provide long-lasting, lower-cost performance for years to come.
