Insulated Sectional Steel-Back Door Model 470
Model 470
Insulated sectional steel door model 470 is solidly constructed for reliable performance, the insulated sectional steel-back door, is perfect for commercial and industrial applications. The 2” polystyrene insulation delivers superior U-factor of 0.23 (R-value of 9.83).
Overview
Construction
| Product Specifications | |
|---|---|
| Standard Max Width | 20’0″ (6,096 mm) |
| Standard Max Height | 14’1″ (4,293 mm) |
| Panel Thickness | 2″ (51 mm) |
| U-Factor* | .23 |
| R-Value** | 9.83 |
| Exterior Steel | 26-gauge |
| Wind Load | FBC approved wind load options available. |
| Interior Steel | 29-gauge |
| Exterior Surface | Ribbed, woodgrain embossed |
| Insulation | Bonded Polystyrene |
| Standard springs | 10,000 cycles |
| Track | 2″ and 3″ track available in standard fit, high lift, full vertical, low headroom, and follow roof line options |
*U-factor values are independently tested and verified per ANSI/DASMA 105.
**Overhead Door™ Brand uses a calculated door section R-value for our insulated doors
Warranty
- 10 year limited delamination and rust through, 1 year limited on door
Options
Almond
Brown
Desert Tan
Sandstone
White
- Insulated glass, tempered glass, polycarbonate, multi-wall polycarbonate, etc.
- High-usage package
- Wind load options
- Electric operator
- Chain hoist
- Posi-Tension™ drums
- Safety bottom fixture
- Bottom-sensing edge
- Exhaust ports
- Hinge upgrade package
- Residential lite options
- Window Glazing Options
Brochures
Documents
Insulated Sectional Steel-Back Door
Related products
Aluminum Glass Door – 511
Model 511
Aluminum Glass Door model 511 is designed in sizes up to 16'2" (4928 mm) wide and 16'1" high (4902 mm). Featuring a narrow center stile width of 21/32" (17 mm), these doors are sleek, attractive and permit maximum visibility. An array of glazing choices, top and bottom rail widths, finishes and special options customizes the 511 to satisfy nearly any project requirement.
Sectional Steel Door Model 416
Model 416
Sectional steel door model 416 is strong, durable and versatile. Designed for heavy-duty commercial and industrial applications, this door is available in 16-gauge galvanized steel, in sizes up to 32'2" (9804 mm) width and 21'1" (6426 mm) in height. Available with an array of options, the Model 416 can be easily customized to meet any project requirement where an extra heavy-duty door is required.
Sectional Steel Door Model 418
Model 418
When your project requires a solid sectional steel door system that will hold up to heavy use, rough handling and extreme conditions look to Overhead Door™ 418 to pack an extra measure of toughness. Fabricated of 16-gauge, flush galvanized steel exterior and 26-gauge steel back cover, these 2" (51 mm) thick doors offer an R-value of 7.35 (1.29 W/m2). A wide array of options allow these doors to meet the most stringent project requirements that call for a degree of thermal efficiency.
Sectional Steel Door Model 430
Model 430
Sectional steel door model 430 is available in sizes up to 20´2" (6147 mm) in width and 16´1" (4902 mm) in height for a variety of medium-duty applications. These doors feature a 2" (51 mm) panel thickness and a nominal 24-gauge, ribbed, white galvanized steel exterior with 16-gauge steel intermediate and end stiles (Industrial Brown exterior is available). The Model 430 is customizable to any project specification with a variety of additionally available options.
Sectional Warehouse Doors
Model 406
Our Sectional Warehouse Doors provide a highly efficient design for strength and longevity for use in demanding commercial settings. They feature full 2” thickness for ultimate strength and durability. Optional insulation consists of 1 5/16” expanded polystyrene throughout the door. Both steel and polylaminate backer choices are available to ensure these models are well-suited for a wide range of applications.
Sectional Warehouse Doors
Model 401
Our Sectional Warehouse Doors provide a highly efficient design for strength and longevity for use in demanding commercial settings. They feature full 2” thickness for ultimate strength and durability. Optional insulation consists of 1 5/16” expanded polystyrene throughout the door. Both steel and polylaminate backer choices are available to ensure these models are well-suited for a wide range of applications.
Sectional Warehouse Doors
Model 403
Our Sectional Warehouse Doors provide a highly efficient design for strength and longevity for use in demanding commercial settings. They feature full 2” thickness for ultimate strength and durability. Optional insulation consists of 1 5/16” expanded polystyrene throughout the door. Both steel and polylaminate backer choices are available to ensure these models are well-suited for a wide range of applications.
Sectional Warehouse Doors
Model 405
Our Sectional Warehouse Doors provide a highly efficient design for strength and longevity for use in demanding commercial settings. They feature full 2” thickness for ultimate strength and durability. Optional insulation consists of 1 5/16” expanded polystyrene throughout the door. Both steel and polylaminate backer choices are available to ensure these models are well-suited for a wide range of applications.
