EverGuard™ Tornado Resistant Shelter Door – 610F
Model 610F
Designed to provide dependable protection from high wind and wind-borne debris during tornadoes and hurricanes. Built, tested, and certified to meet the stringent requirements of the ICC-500 building code as well as the FEMA 361 guideline.
The Model 610F is structural wind load design pressure tested to +/- 300 psf and is impact rated for up to 100 mph. Rolling Steel Storm Shelter Door Model 610F is built to meet your most demanding and rigorous applications.
Applications include schools, storm shelters, safe room, emergency operations centers, 911 call stations, fire, rescue, and ambulance stations, police stations.
Overview
Construction
| Product Specifications | |
|---|---|
| Standard Max Width | 16' |
| Standard Max Height | 16' |
| Curtain | 12-gauge galvanized steel |
| Finish | PowderGuard® powder coat in gray |
| Hood | 24-gauge galvanized steel |
| Standard mounting | Face-of-wall |
| Operation | RHX® service door operator with chain hoist override |
| Standard Spring | 10,000 cycles |
| Guides | Three steel angles |
| Bottom Bar | Double angle steel |
| Obstruction detection | Wireless sensing edge |
| Wind load | Tested: +/- 300 psf (ICC-500/FEMA 361) Tornado: +/- 250 psf (ICC-500/FEMA 361) Hurricane: +/- 200 psf (ICC-500/FEMA 361) |
| Impact rated | Up to 100 mph |
| Slat Profile |
The C-600 slat features a curved slat profile that measures 6"(152 mm) in height.
|
Warranty
- 3-Year Limited
Options
Standard Exterior Color
Gray
Powder Coat Color Options
PowderGuard® Premium powder coat options are available in approximately 200 colors as well as custom matching to specification.
Door mount options: Interior or Exterior
Operation mounting options: Bench, Front of hood, Top of hood, Wall
Operation voltage options: 208/230/460V 3Phase 60Hz, 208/230/460V 3Phase 60Hz, 575V 3Phase 60Hz
Additional operation options: Timer to close, auxiliary output module
Operator accessories: receiver, transmitter, push button station, pull station, key switch, motion detector, loop detector, Traffic light, ADA horn/strobe.
Curtain Finish options: Galvanized G90, PowderGuard® Premium Powder Coat RAL, Custom Powder Coat
Guide and bottom bar finish options: galvanized hot dipped, powder coat black, powder coat gray to match curtain, RAL, custom, zinc rich
Hood finish options: primed gray, RAL, galvanized G90, gray primed G90, custom
Documents
EverGuard™ Tornado Resistant Shelter Door
Product Literature
Related products
Fire Rated Rolling Counter Door – 640
Model 640
This fire rated counter door features 22-gauge primed galvanized steel and is ideal for applications where safety is as important as style. These NFPA-80 compliant doors are labeled with either a 3 hour UL Class A label for masonry applications, or a 1-1/2 hour UL Class B label for non-masonry fire walls (a 3 hour non-masonry UL label is available upon request). Oversize UL labels are available for certain applications. A host of standard and optional features further improve performance of these doors beyond the norm in fire-rated applications. This fire-rated counter door has exposed components made of primed galvanized steel.
Fire-Rated Insulated Rolling Service Door – 635
Model 635
The FireKing® Insulated Fire-Rated Doors Model 635
Our insulated fire-rated rolling service door offers superior protection wherever a listed insulated fire door is required (max. width 24’; max. height 24’). The Model 635 insulated rolling steel door serves as a thermal barrier, ideal for applications which require separation due to climate control requirements. The insulation used in this door offers added energy efficiency (R-value of 4.5), sound transmission control (STC 21), and the mineral wool utilized in the slat insert meets the Smoke and Flame Index of 5. Common masonry and non-masonry mounted applications include: facilities with paint booths, file rooms, material storage locations, warehouses, shared walls between businesses, public record storage, and public buildings such as libraries. The Model 635 insulated fire door is available with UL (FM optional) labels for 1-1/2, 3, 4 and oversized doors. These doors feature a mechanical auto resettable hoist (non-motorized) that enables easy drop test and reset of the fire door in just seconds. Fusible links are mounted on both sides of the wall that separate to automatically close the door in case of fire. Additional safety and protection features are available, including: Fire Sentinel® time-delay release device, FireLite® vision lites, smoke detectors, horns and strobes.
Fire-Rated Rolling Counter Door – 662
Model 662
Fire-Rated Counter Doors with Galvanized Steel Curtain, Stainless Steel Frame and Hood
Model 662 fire-rated counter doors an integral frame are suited for many applications including schools, retail settings, hospitals, food service counters, concessions and cafeterias. These doors fit openings up to 9’5” x 4’5” (2870 mm x 1346 mm) and carry a UL 1-1/2 hour label for masonry and non-masonry fire walls. Model 662 integral frame doors are assembled at the factory as a complete unit with fully welded frames. The curtain is 22-gauge galvanized steel with baked-on polyester top coat; while the frame, guides, sill, hood and fascia are stainless steel. Other safety and protection features are available, including: Fire Sentinel® time-delay release device, smoke detectors, horns, and strobes.
Fire-Rated Rolling Service Door – 631
Model 631
FireKing® Model 631
Fire-rated service door model 631 is a smaller fire door with UL/ULC ratings. The FireKing® Model 631 rolling fire-rated service door offers superior protection wherever a small UL listed fire door is required. Additional safety and protection features are available, including: Fire Sentinel® time-delay release device, FireLite® vision lites, smoke detectors, horns and strobes
Heavy Duty Springless Service Door – 610S
Model 610S
EverServe® Model 610S
This heavy duty springless service door is well suited for applications that require the security and performance of a rolling service door with the added benefits of increased cycle life, reliability, and ease of serviceability. The fenestration option allows for air circulation and visibility, making it an ideal solution for facility managers seeking to replace parking garage grilles.
Rolling Counter Doors – 652
Model 652
Distinguished by their clear anodized aluminum curtain finish, Model 652 rolling counter doors are designed to fit openings to 20' wide and 9' high. These doors are ideal for a host of small-opening applications where security is important and non-rated door is appropriate. Common applications include concession areas, cafeterias, pharmacies, parts-storage areas and ticket windows.
Rolling Integral Frame Counter Doors – 655
Model 655
The integral frame / packaged counter door Model 655 combines an attractive finished appearance with the convenience of a factory-assembled unit. These rolling counter doors feature a high-quality 16-gauge stainless steel frame, hood and fascia complemented by a 14-gauge sill. Available to fit openings up to 12'5" (3785mm) wide and 6'5” 1956 mm) high, these rolling counter doors have a variety of applications including food service areas.
Rolling Steel Service Doors – 610
Model 610
Rolling steel door model 610 is a perennial best-seller for good reason. The standard features exceed the norm for quality and a myriad of options allow for true customization. The Model 610 is built with a standard galvanized steel curtain, or an optional stainless steel or aluminum curtain. The standard curtain slat is the attractive C-187 curved profile, with additional slat options available in curved and flat. Finishes range from four standard colors to approximately 200 powder coat colors or matched to your specification. A host of other options — including motor operation, pass doors, exhaust ports, between-jambs mounting, cylinder locks and special usage packages — allow the 610 to be adapted to any environment.
Security and Storm Shelter Model 610F is a specialized option designed for storm shelters, schools and emergency operations centers. Model 610F provides tornado resistance while meeting the high wind load and impact requirements for FEMA 361.
