Hydraulic Pit Leveler – Models H68R & H78R
Built for Performance. Designed for Installers.
The Hydraulic Pit Leveler is a loading dock solution designed to enhance safety and efficiency in material handling operations. Featuring a hydraulic system, it offers smooth and reliable operation, reducing manual effort and potential injuries. Its durable construction ensures longevity, making it suitable for various industrial applications. This pit leveler seamlessly bridges the gap between the loading dock and trailers, facilitating safe and efficient loading and unloading processes.
1-Year Limited Warranty; 2-Year Limited Warranty when Overhead Door™ brand door and Hydraulic Pit Leveler purchased together.
Features
Installer Friendly
- Four steel fork loops bolted to the deck improve stability during transport and placement, and help prevent sliding when stacked
- Height adjusters operate from the building floor—no need to crawl beneath the leveler to shim and weld the rear frame
- Adjusters quickly align the deck with the building floor for faster setup
- Shim only under the main cylinder, lip keeper, and maintenance brace—improves safety and reduces effort
- Rear curb angle cutouts clearly mark weld points for quicker installation
Smooth Building-To-Truck Transition
- Optimized beveled lip reduces bumps and minimizes damage to cargo and equipment
- Creates a smoother, level pathway to reduce shocks and jolts to workers
- Supports efficient movement of forklifts and material handling equipment
Durable Design and Finish
- Center-mounted hydraulic lift cylinder ensures optimal performance and safety
- Textured powder coat finish provides long-lasting durability
- Meets ANSI MH30.1-2022 load testing requirements
- C-channel beams strengthen the deck and minimize moisture buildup
- Flat deck design eliminates transition angles—reducing common repair needs
- Full-width deck hinge enhances long-term durability
Safety Focused
- Velocity fuse restricts free fall of leveler to 3” if trailer leaves the dock unexpectedly
- Fully floating hydraulic system allows constant contact with the bed of the trailer
- Proprietary powder coat formulation on deck and lip surfaces is textured to provide enhanced traction and non-slip protection even when wet
- Minimal bumps or gaps on deck/lip reduce trip hazards for workers
Durability, Low Maintenance, Low Downtime
- Textured powder coat provides an extremely durable finish, better corrosion protection and adhesion compared to wet paint
- Heavy-duty multi-lug hinge sheds debris to reduce stress and wear while allowing easy lubrication for smooth operation
- Deck hinge is fully supported across the entire width of the deck, which spreads the load across the width of the deck instead of concentrating the load on just a few hinge points
- Fully protected powerpack behind the main cylinder, easy to access and adjust
Environmentally Friendly
- Our powder coat process has fewer Volatile Organic Compounds (VOCs) and solvents compared to paint
- Overspray is recycled which reduces waste disposal issues compared to a traditional paint process
- The US Environmental Protection Agency (EPA) recommends powder coatings as a sustainable coating option
Serviceability & Installation
- Open base frame provides full-length access for cleaning and service, eliminating rear cross-pit beams that trap debris and block pit access
- Serviceable lip and hinge pins can be removed without breaking welds
- Easily accessible tethered maintenance brace
- Lip keepers adjust for off spec pits to more easily accommodate 18”/20”
| WEIGHT CAPACITY | DIMENSION (NOMINAL) | |
|---|---|---|
| 30,000, 35,000, 40,000, and 45,000 lbs. | Model H68R: 6' W x 8' L Model H78R: 7' W x 8' L |
|
| BUMPERS | STANDARD | OPTIONAL |
| Laminated Bumpers 410-14 W1 |
✓ | |
| Laminated Upgraded Bumpers 410-14 W2, 412-14 W1/W2, 610-14 W1/W2, V420-11 W1/W2, V620-11 W1/W2, V624-11 W1/W2 |
✓ | |
| Steel Face Bumpers 410-14 SF W1/W2, 610-14 SF W1/W2 |
✓ | |
| CONTROL | ||
| Base Control Panel (Single button) | ✓ | |
| Working, Range 12" Above/Below Dock | ✓ | |
| FINISH | ||
| Gray Powder Coat | ✓ | |
| LIP | ||
| 16" Lip | ✓ | |
| 18" & 20" Lip | ✓ | |
| Lip Keepers | ✓ | |
| Lip Bevel | ✓ | |
| Lip Taper (Model H78R only) | ✓ | |
| OPERATION | ||
| End Loading & Below Dock Capable | ✓ | |
| Hydraulic Pump: 3 Phase 208V, 240V, 480V | ✓ | |
| Hydraulic Pump: Single Phase 120V, 208V, 240V | ✓ | |
| Working, Range 12" Above/Below Dock | ✓ | |
| SAFETY | ||
| Maintenance Brace | ✓ | |
| Safety Tread on Deck and Lip | ✓ | |
| Velocity Safety Fuse | ✓ | |
| Toe Guards: Full Operating Range | ✓ | |
| TRANSPORT | ||
| Reinforced Lifting Bolt Holes in Deck (4) | ✓ | |
| Steel Lifting Loops (Bolt to Deck) (4) | ✓ | |
| WEATHER SEALS | ||
| Weather Seal: Brush | ✓ | |
| Weather Seal: Neoprene | ✓ | |
Documents
Related products
“HP” SERIES STANDARD DUTY HYDRAULIC
Pit Style Hydraulic Dock Leveler
The HP Series hydraulic dock leveler is designed with dependability and toughness in mind for your medium to lighter duty applications. The “HP” offers the same easy push button smooth, consistent operation as the heavy duty H series and the same built in safety, durability and toughness. Easy clean out and servicing are features of all McGuire levelers. Your budget, your safety and trouble free service are always number one with McGuire. They are also most often mounted in a pre-formed pit at the dock commonly used to reduce the grade between the dock floor and the trailer bed. Various sizes and capacities allow for a large amount of flexibility. Hydraulic levelers have added safety features and save time in operation and maintenance.
This series comes in 6’, 6’6” & 7’ standard widths and 6’, 8’ & 10’ standard lengths with 12’ and other lengths available. Standard capacities are 25K, 30K, 35K and 40K CIR (Comparative Industry Rating).
All Aluminum Welded Truck Dock Board (ATD)
- All Aluminum Welded Truck Dock Board (ATD) The All Aluminum Welded Truck Dock Board (ATD) is a lightweight yet durable solution for low to medium-volume loading applications. Designed for use with forklifts and pallet jacks, it features all-welded aluminum construction for strength and reliability. This innovative alternative to heavy-duty steel dock boards ensures efficient and safe loading operations.
Aluminum Walk Ramps – Hook Style
Aluminum Walk Ramps – Hook Style
Lightweight, Durable, and Secure for Efficient Loading
Bluff’s Aluminum Walk Ramps – Hook Style provides a portable and secure solution for easily loading and unloading cargo. These ramps are designed for versatility and safety, ideal for warehouses, delivery services, and industrial applications.
Steel Dock Board (TFL)
Steel Dock Board (TFL)
Reliable Strength with Locking Leg Stability
The Steel Dock Board (TFL) features the same heavy-duty design as the “T” dock board but utilizes locking legs instead of steel pins for secure positioning. This design ensures stability and ease of use, making it an excellent choice for standard dock loading operations.
Not recommended for below-dock loading.
